Thanks Tony for the quick reply. I have a list of systems and they are all mapped to their departments ion which they reside. I had the departments in a separate column. I then grouped them by department and used the F-R chart type, group by vertex attribute (department) and then used layout options to lay them out in boxes by groups. at this point I had what I wanted. I had a bunch of isolates (systems with no edges and by default these were not rendered) in each department and I wanted to see if I can show them inside the department boxes. But Nodexl puts all isolates in a separate box as a group - it doesn't put it in the respective department boxes. I know that I may be not doing something correct. I did not even try the group by cluster.
↧
New Post: handling isolates in NodexXL
↧
New Post: handling isolates in NodexXL
I see. Please ignore my comments about Group by Cluster, which I wrongly assumed that you are using. You are actually using Group by Vertex Attribute.
I think the problem is that your isolates did not get put into the department groups they belong in. They are in NO groups, and NodeXL places all ungrouped vertices in their own box. (It doesn't put all isolates in their own box; it puts all ungrouped vertices in their own box.)
If your isolates were not set to "Show" when you ran Group by Vertex Attribute, then NodeXL completely ignored the isolates and did not place them in groups. You set them to "Show" afterward and that caused them to appear in the graph pane, but they remained ungrouped.
The solution, then, is to run Group by Vertex Attribute again, while the isolates are set to Show. They will then be grouped properly, and they should appear in their correct department boxes in the graph pane.
-- Tony
I think the problem is that your isolates did not get put into the department groups they belong in. They are in NO groups, and NodeXL places all ungrouped vertices in their own box. (It doesn't put all isolates in their own box; it puts all ungrouped vertices in their own box.)
If your isolates were not set to "Show" when you ran Group by Vertex Attribute, then NodeXL completely ignored the isolates and did not place them in groups. You set them to "Show" afterward and that caused them to appear in the graph pane, but they remained ungrouped.
The solution, then, is to run Group by Vertex Attribute again, while the isolates are set to Show. They will then be grouped properly, and they should appear in their correct department boxes in the graph pane.
-- Tony
↧
↧
New Post: Selected point on model is not corresponding to highlighted data
Tony,
Thanks so much. I've refreshed and I know that's not the problem. I don't have access to my workbook right now, but I will in the morning and I'll post it. Thanks again.
--Hayes
Thanks so much. I've refreshed and I know that's not the problem. I don't have access to my workbook right now, but I will in the morning and I'll post it. Thanks again.
--Hayes
↧
New Post: NodeXL does not install correctly
Thanks for your guidence, I have done all your instruction above, and then, a command window suggested me as follows:"The following components failed to install:
The specific information as follows:
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.0.0 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Running checks for package 'Microsoft Office 2007 Primary Interop Assemblies', phase BuildList
Running external check with command 'C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\Office2007PIARedist\ComponentCheck.exe' and parameters ''
Process exited with code 1
Setting value '1 {int}' for property 'PIAInstallAction'
The following properties have been set for package 'Microsoft Office 2007 Primary Interop Assemblies':
Property: [PIAInstallAction] = 1 {int}
Running checks for command 'Office2007PIARedist\o2007pia.msi'
Result of running operator 'ValueNotEqualTo' on property 'PIAInstallAction' and value '0': true
Result of checks for command 'Office2007PIARedist\o2007pia.msi' is 'Bypass'
'Microsoft Office 2007 Primary Interop Assemblies' RunCheck result: No Install Needed
Running checks for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1', phase BuildList
Reading value 'Install' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v9.0.21022'
Read integer value 1
Setting value '1 {int}' for property 'VSTORuntimeInstalled'
Reading value 'Update' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v3'
Unable to read registry value
Not setting value for property 'VSTORuntimeUpdateInstalled'
The following properties have been set for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1':
Property: [VSTORuntimeInstalled] = 1 {int}
Running checks for command 'VSTOR30\vstor30.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'VSTORuntimeInstalled' and value '1': true
Result of checks for command 'VSTOR30\vstor30.exe' is 'Bypass'
Running checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeUpdateInstalled' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe' is 'Install'
'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' RunCheck result: Install Needed
EULA for components 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' was accepted.
Copying files to temporary directory "C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\"
Downloading files to "C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\"
(2013/7/24 19:57:49) Downloading 'VSTOR30\vstor30sp1-KB949258-x86.exe' from 'http://go.microsoft.com/fwlink/?LinkId=120187' to 'C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\'
Download completed at 2013/7/24 19:57:50
Verifying file integrity of C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\VSTOR30\vstor30sp1-KB949258-x86.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1', phase BeforePackage
Reading value 'Install' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v9.0.21022'
Read integer value 1
Setting value '1 {int}' for property 'VSTORuntimeInstalled'
Reading value 'Update' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v3'
Unable to read registry value
Not setting value for property 'VSTORuntimeUpdateInstalled'
The following properties have been set for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1':
Property: [VSTORuntimeInstalled] = 1 {int}
Running checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeUpdateInstalled' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe' is 'Install'
'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' RunCheck result: Install Needed
Verifying file integrity of C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\VSTOR30\vstor30sp1-KB949258-x86.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\VSTOR30\vstor30sp1-KB949258-x86.exe' and parameters ' /q:a /c:"install /q /l"'
Process exited with code -2147023291
Status of package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' after install is 'InstallFailed'
-
Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1
The specific information as follows:
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.0.0 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Running checks for package 'Microsoft Office 2007 Primary Interop Assemblies', phase BuildList
Running external check with command 'C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\Office2007PIARedist\ComponentCheck.exe' and parameters ''
Process exited with code 1
Setting value '1 {int}' for property 'PIAInstallAction'
The following properties have been set for package 'Microsoft Office 2007 Primary Interop Assemblies':
Property: [PIAInstallAction] = 1 {int}
Running checks for command 'Office2007PIARedist\o2007pia.msi'
Result of running operator 'ValueNotEqualTo' on property 'PIAInstallAction' and value '0': true
Result of checks for command 'Office2007PIARedist\o2007pia.msi' is 'Bypass'
'Microsoft Office 2007 Primary Interop Assemblies' RunCheck result: No Install Needed
Running checks for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1', phase BuildList
Reading value 'Install' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v9.0.21022'
Read integer value 1
Setting value '1 {int}' for property 'VSTORuntimeInstalled'
Reading value 'Update' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v3'
Unable to read registry value
Not setting value for property 'VSTORuntimeUpdateInstalled'
The following properties have been set for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1':
Property: [VSTORuntimeInstalled] = 1 {int}
Running checks for command 'VSTOR30\vstor30.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'VSTORuntimeInstalled' and value '1': true
Result of checks for command 'VSTOR30\vstor30.exe' is 'Bypass'
Running checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeUpdateInstalled' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe' is 'Install'
'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' RunCheck result: Install Needed
EULA for components 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' was accepted.
Copying files to temporary directory "C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\"
Downloading files to "C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\"
(2013/7/24 19:57:49) Downloading 'VSTOR30\vstor30sp1-KB949258-x86.exe' from 'http://go.microsoft.com/fwlink/?LinkId=120187' to 'C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\'
Download completed at 2013/7/24 19:57:50
Verifying file integrity of C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\VSTOR30\vstor30sp1-KB949258-x86.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1', phase BeforePackage
Reading value 'Install' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v9.0.21022'
Read integer value 1
Setting value '1 {int}' for property 'VSTORuntimeInstalled'
Reading value 'Update' of registry key 'HKLM\SOFTWARE\Microsoft\VSTO Runtime Setup\v3'
Unable to read registry value
Not setting value for property 'VSTORuntimeUpdateInstalled'
The following properties have been set for package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1':
Property: [VSTORuntimeInstalled] = 1 {int}
Running checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe'
Skipping ByPassIf because Property 'VSTORuntimeUpdateInstalled' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of checks for command 'VSTOR30\vstor30sp1-KB949258-x86.exe' is 'Install'
'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' RunCheck result: Install Needed
Verifying file integrity of C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\VSTOR30\vstor30sp1-KB949258-x86.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\sony\AppData\Local\Temp\VSDCDC.tmp\VSTOR30\vstor30sp1-KB949258-x86.exe' and parameters ' /q:a /c:"install /q /l"'
Process exited with code -2147023291
Status of package 'Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1' after install is 'InstallFailed'
↧
New Post: Dynamic degree
Is NodeXL able to calculate degree of selected nodes? For example if I'm using degree value as size of the node, and I visualize vertexes just from one category, can I recalculate new degree somehow?
I want to make visualization for each category and groups of categories (based on values in certain column or groups) where node size would be equal to actual degree, not just overall degree.
Thanks
I want to make visualization for each category and groups of categories (based on values in certain column or groups) where node size would be equal to actual degree, not just overall degree.
Thanks
↧
↧
Created Unassigned: Selected point on model is not corresponding to highlighted data [24547]
Here is my workbook.
↧
New Post: Selected point on model is not corresponding to highlighted data
Tony, I've posted my workbook in the "Issues" section. I'd really appreciate if you took a look. Thanks!
↧
New Post: Selected point on model is not corresponding to highlighted data
Hayes:
I'll need the workbook file--MyWorkbook.xlsx, for example. You posted an image of the workbook.
-- Tony
I'll need the workbook file--MyWorkbook.xlsx, for example. You posted an image of the workbook.
-- Tony
↧
New Post: Selected point on model is not corresponding to highlighted data
Oh, I see. I don't know why I thought you meant a screenshot. But, actually (miraculously) it started working again today after I closed the program and opened it for the third time. I guess the third time is the charm. Thanks for your help!
↧
↧
New Post: NodeXL does not install correctly
Thank you for the log, which is very helpful.
A piece of Microsoft software that NodeXL needs and that the NodeXL setup program automatically installs isn't working properly on your computer. It's called "Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1."
Please try the following:
A piece of Microsoft software that NodeXL needs and that the NodeXL setup program automatically installs isn't working properly on your computer. It's called "Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1."
Please try the following:
-
Close all Excel windows.
-
Go to http://www.microsoft.com/download/en/details.aspx?id=1132, then download and run the file called vstor30sp1-KB949258-x86.exe.
-
If you don't get any error messages in step 2, run NodeXL's setup program again.
↧
New Post: Dynamic degree
When NodeXL calculates degree, it looks at every vertex and edge in the graph. It doesn't do the calculations on a per-group basis.
You could export a group to a new workbook and have NodeXL calculate degree in the new workbook. That could be pretty tedious is you have a lot of groups, but here are the steps anyway:
You could export a group to a new workbook and have NodeXL calculate degree in the new workbook. That could be pretty tedious is you have a lot of groups, but here are the steps anyway:
-
Select the group you are interested in. One way to do that is to select a row on the Groups worksheet, which will select all the vertices and edges in that group.
-
Use NodeXL, Data, Export, Export Selection to New NodeXL Workbook.
-
In the new workbook, use NodeXL, Analysis, Graph Metrics to calculate degree for the vertices in the exported group.
↧
New Post: NodeXL does not install correctly
Dear Tony, I have installed the file as you told me, but, unfortunately, the error still exists. This time, I found the suggetion like this:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.net>
</configuration>
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.net>
<webRequestModules>
<remove prefix="http:"/>
<remove prefix="https:"/>
<add prefix="http:"
type="Microsoft.Office.BusinessApplications.Fba.HttpFbaRequestCreator,Microsoft.Office.BusinessApplications.Fba,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" />
<add prefix="https:"
type="Microsoft.Office.BusinessApplications.Fba.HttpFbaRequestCreator,Microsoft.Office.BusinessApplications.Fba,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" />
</webRequestModules></configuration>
↧
New Post: Twitter Search Network in NodeXL
Hello
When I try to use Twitter Search Network, it can`t use Cyrillic alphabet. It wrights "There no people in that network" in any query. But when I use Latin alphabet everything is OK. I remember that befor updating I used Cyrillic alphabet and everything was working. Is it possible to do something with this problem?
Thanks
Olga
When I try to use Twitter Search Network, it can`t use Cyrillic alphabet. It wrights "There no people in that network" in any query. But when I use Latin alphabet everything is OK. I remember that befor updating I used Cyrillic alphabet and everything was working. Is it possible to do something with this problem?
Thanks
Olga
↧
↧
New Post: Dynamic degree
tcap479 wrote:
Anyway thanks for advice, I was hoping there is a faster way to do that. I was doing that like this, but it's just awful...
When NodeXL calculates degree, it looks at every vertex and edge in the graph. It doesn't do the calculations on a per-group basis.I think it doesnt work like that. It does not look what is in the graph. If I visualize just some of the records the degree would be still the same. It calculates it from whole table.
Anyway thanks for advice, I was hoping there is a faster way to do that. I was doing that like this, but it's just awful...
↧
New Post: Dynamic degree
Actually right now, it calculates me In and Out degree on basis of graph. So I can just sum them together.. It kinda works...
↧
New Post: Dynamic degree
Yes, it does work like that. It reads the workbook, creates a graph from the workbook's contents, and looks at every vertex and edge in the graph.
I do not know what you mean by visualizing just some of the records, so maybe we're just using different terminology here.
-- Tony
I do not know what you mean by visualizing just some of the records, so maybe we're just using different terminology here.
-- Tony
↧
New Post: creating sankey diagrams in nodeXL
Hi:
I am posting this again because I am surprised I did not hear anything.
I am wondering if anyone knows if its possible to do sankey diagrams in NodeXL. I want the visualization something similar to the first picture at
http://www.designworklife.com/2009/04/15/density-design/
or a similar one at http://flowingdata.com/2010/06/29/imported-world-cup-players/
and here is another basic sankey diagram
http://bost.ocks.org/mike/sankey/
I would think that this is can be done by nodexl.
thanks
I am posting this again because I am surprised I did not hear anything.
I am wondering if anyone knows if its possible to do sankey diagrams in NodeXL. I want the visualization something similar to the first picture at
http://www.designworklife.com/2009/04/15/density-design/
or a similar one at http://flowingdata.com/2010/06/29/imported-world-cup-players/
and here is another basic sankey diagram
http://bost.ocks.org/mike/sankey/
I would think that this is can be done by nodexl.
thanks
↧
↧
New Post: NodeXL does not install correctly
I don't think the suggestion you found applies to this particular problem.
I don't know what's preventing the Microsoft software from being installed on your computer. My best suggestion is to post a question on the Microsoft forum that is dedicated to VSTO (Vistual Studio Tools for Office), and see if someone there knows how to fix the installation problem. You can find the forum here:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsto
In your question, tell them that you are trying to install the "Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1," and include the error message you get when you try to install it. (You didn't mention the latest error message here, but they will need to know that.)
Sorry I can't be of more help.
-- Tony
I don't know what's preventing the Microsoft software from being installed on your computer. My best suggestion is to post a question on the Microsoft forum that is dedicated to VSTO (Vistual Studio Tools for Office), and see if someone there knows how to fix the installation problem. You can find the forum here:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsto
In your question, tell them that you are trying to install the "Visual Studio Tools for the Office system 3.0 Runtime Service Pack 1," and include the error message you get when you try to install it. (You didn't mention the latest error message here, but they will need to know that.)
Sorry I can't be of more help.
-- Tony
↧
New Post: Twitter Search Network in NodeXL
Olga:
I've filed a bug report about this. Thank you for reporting it.
Here is a way to work around the bug in the meantime:
-- Tony
I've filed a bug report about this. Thank you for reporting it.
Here is a way to work around the bug in the meantime:
-
Don't enter the Cyrillic search term in the Import from Twitter Search Network dialog box.
-
Instead, go to http://meyerweb.com/eric/tools/dencoder/
-
Enter your Cyrillic search term in the big blue box on that page. Sample: Русский
-
Click the Encode (NOT the Decode) button.
-
Copy the encoded text out of the big blue box. It will look something like this: %D0%A0%D1%83%D1%81%D1%81%D0%BA%D0%B8%D0%B9
-
Paste the encoded text into the Import from Twitter Search Network dialog box.
-- Tony
↧
New Post: Twitter Search Network in NodeXL
(Thanks to mazensh, who discovered this fix for a similar problem with Arabic at http://nodexl.codeplex.com/discussions/445222.)
-- Tony
-- Tony
↧